|
|
-
 |
• What is inside your MagicSing easy-carry bag?
1) Your MagicSing bag should contain the following items.(Different MagicSing models have different items.) |
| BASIC ITEM |
 |
 |
 |
 |
 |
 |
| Carry Bag |
Stand |
Main MIC |
AV Cable |
SMPS/AC Adaptor |
Karaoke Handbook |
 |
 |
 |
|
|
|
| USB Cable |
Video Cable |
USB Installation CD |
|
|
|
|
| 2) If you find any of the items above missing and(or) damaged, please contact the store where you purchased the product from
immediately. |
|
|
|
 |
| • How do you set up your MagicSing? |
1) Connect the MIC Cable to your MagicSing.
• Find the white arrow at the end of the cable.
• Align the white arrow with the arrow right at the top of the cable jack terminal found at the back (bottom part) of the microphone.
• Carefully insert the jack of the cable into the jack terminal until you hear a click sound to ensure that they are properly connected.
• To disconnect, carefully slide down the tab of the mic cable and pull it out from the MagicSing cable jack terminal. |
2) Connect the Audio & Video cable to the RCA jack terminal on your TV (found either on the sides or at the rear of your TV) in the following manner
• VIDEO : Yellow jack to the yellow terminal
• AUDIO(R) : Red jack to the red terminal
• AUDIO(L) : White jack to the white terminal
• If there are only two RCA jack terminals on your TV
(Mono TV),connect the yellow jack into the
yellow RCA jack terminal and connect
the white jack into the other
RCA jack on your TV.
|
| 3) Connect the Male AC Adaptor jack into the Female AV Cable terminal (black). Plug the other end of the AC Adaptor to the main power supply. |
4) In the absence of power supply, you can still operate your MagicSing by inserting two AA batteries into the battery compartment found at the back of the microphone.
* Caution : Do not use batteries and the power adaptor simultaneously. It will cause battery leakage that will damage your MagicSing microphone. |
5) Turn your TV on and set it in the Video Mode.
* Please turn off the function "Automatic Volume Level" (AVL/AVC) on your TV. |
|
|
|
 |
| • How do you start using your MagicSing? |
1) Turn on the MagicSing microphone power on by briefly pressing
, and then you will see the word "P-ON" on the microphone LCD display and the MagicSing display on your TV screen. |
|
2) To select a song using your MagicSing microphone, wait for the word "SEL" to appear on the microphone LCD display screen and the words "SELECT A SONG" to appear on your TV screen, and then press [▼],[▲] or [SEARCH]
When the song list appears on your TV screen, continuously press either [▼] or [▲], and then you will notice a blue bar highlighting each song title on the list.
If you wish to play the highlighted song, just press [▶/■].
|
|
3) You can also select a song by browsing through the pages of the song list in the MagicSing Handbook.
To play your selected song, just key in the numbers found beside the song title onto your MagicSing microphone and then press [▶/■].
* To enjoy more advanced features of your MagicSing, please refer to the User's Manual found in the MagicSing Handbook. |
|
|
|
|
